Backlit Photo Frames


For many years Wa-chur-ed Observatory has offered Backlit prints of original astro-photography in various sizes. These have always proven to be wildly popular and this did not go unnoticed by other astro-photographers, who requested that I make backlit prints of their images. But the stunning appearance of backlit images is not limited to astro-photography, so I am pleased to now offer these backlit frames and prints to everyone – for any image you want; your favorite nature photo, family portrait, even your own astro-photo!

Why Backlit?

Images printed on paper can never have a contrast ratio of more than 100:1, while our eyes can handle ratios of 10,000:1 or more (the exact number is difficult to define or measure). Printing an image on transparency film provides a contrast range of almost 1,000:1 – not as good as the eye, but a huge improvement over paper prints. This is especially important for astro-photos because they inherently have very high contrast ratios – from the blackness of empty space to very bright stars. But it can also enhance the appearance of nearly any image.

It’s not really possible to capture the dramatic appearance of these prints so that you can see it on your computer screen.  In these sample photos I have dimmed the frame down a lot so that doesn’t look over-exposed.  But in person, the response I usually get is either “that’s stunning” or just “Wow!”

8x10_Desk

How Does it Work?

The frame is fairly simple. A sheet of special acrylic material is lit along the edges by a strip of closely spaced, white LEDs, forming a “light box”. The light is evenly distributed through the material and eventually bounces off a white backing and through the film. Both the light box and film (plus a mat and glass cover sheet) are assembled into a conventional photo frame (either wood or aluminum).

Each frame comes with a small AC adapter. Because the light source is LED and the design is very efficient, relatively little power is needed (ranging from 1 to 8 watts).

The film itself is essentially a giant version of a 35mm slide. It is printed on a machine that uses sweeping laser beams to expose the film with more than 1200 pixels per inch. Most places that offer film prints can do only 200 to 400 pixels per inch. Note that each pixel is a full 24 bit color value, unlike an inkjet or laser printer, which can only create a pattern of dots. The film is then processed in traditional “wet” chemistry.

Optimizing an image for display as a backlit print is not a trivial task. I have made more than 100 such prints and know how to get the desired results from the printer. To maintain this quality control, I do not offer “empty” frames or recommend any other printing service.

Pricing for Standard Sizes

Frame Size          Image Size         Price

8 x 10 in.             5 x 7 in.              $74

16 x 20 in.           10 x 13 in.         $199

20 x 26 in.           12 x 18 in.         $279

The standard 8 x 10 frame is wood and comes in black, white, or silver. It can be either desktop or wall-hung. The other sizes are aluminum frames and are for wall hanging only. The standard color is a matte silver, although other colors are available on special order.

Custom Prints

Many other sizes are possible, but generally cost somewhat more per square inch due to the higher cost of purchased materials and labor. The largest size possible is about 19 x 30 inches. The largest I have made to date is a 19 x 25 inch image in a 26 x 32 inch frame.

Yuuge1

Buy a Print

Name (required)

Email (required)

Address (required)

Phone Number (required)

Select Frame Size (required)

Select Frame Color (8x10 only)

Order Notes

Caveats

Backlit film prints need a transparent cover to protect the film (it is even more susceptible to fingerprints and such than a paper print is). For the 8×10 size this is not a big problem – I have shipped dozens of them across the country without breakage. But for the 16×20 and larger sizes there is a high risk of glass breaking. And the broken glass would very likely damage the film print as well.

I can use a clear plastic cover instead, and that makes it very simple and straightforward, but there are significant disadvantages: The plastic is easily scratched, more likely to attract dust, and costs significantly more than glass.

The other solution is to ship the print to you with a chipboard cover to protect the film, and have you (or your favorite frame shop) replace the chipboard with glass. It does not require special glass and even if you have a frame shop do it for you, it should be fairly inexpensive, as it is very easy to do.

To order a backlit frame and film print made from your digital photo, go to the Contact tab and send me an e-mail.  Please indicate the frame size you want.  I’ll get back to you with details.


About Greg Marshall

I am a retired electronics engineer and after a few months of enjoying my leisure I began to miss doing product development. My astronomy hobby always needed new solutions to unique problems, so I decided that whenever I came up with a good solution I would try to make it available to others.

Leave a comment